CC Parts

11-16 Chevrolet Cruze 1.4T Vented Engine Cover with CC Cutout


This engine cover will be discontinued, we have 4 covers left in stock.

We are super excited to announce our very own series of Engine Covers for the 1st Gen! All made here at Cruze Culture in house!

The fitment, quality, and finish of the covers are perfectly designed and cut.

The carbon fiber letter backing add-on, shown in the picture, is unfortunately no longer available.

  • You will need to remove the OEM plastic cover and then it will reveal the four bolts where the coil pack is.
  • Remove those 4 OEM bolts around the coil pack and then use the supplied hardware to install the cover.
  • After you remove the 4 OEM bolts, place the aluminum washer with the rubber backing, then the spacer, then the engine cover, and then the washer with the bolt.
  • Then torque it down to OEM spec.
  • Cruzes with the OEM intake will have 6 diagonal lines.
  • Cruzes with a K&N intake and will have 5 diagonal lines and be two inches shorter on the passenger side to clear the MAF sensor.
  • 1 - 1.4T Vented Engine Cover with CC Cutout.
  • 4 - 2 1/4" Aluminum Unthreaded Spacers.
  • 4 - M6x1mm Stainless Steel Button Head Hex Drive Screws.
  • 4 - Aluminum Washers with Neoprene Rubber Sealing.
  • 4 - Aluminum Washers.
  • Made in the USA!
  • Raw Aluminum
  • Matte Black ($40)
  • Gloss Red ($40)

Customer Reviews

Based on 1 review Write a review!

Recently Viewed